| System | |
|---|---|
| Form Factor | 1U Rackmount |
| Chassis Model | 1U4L |
| Dimensions | 710 mm X 430 mm X 43.5 mm |
| Support MB | EEB, 12''x13'' |
| Front Panel | |
| Buttons | Power Button UID Button |
| LEDs | POWER LED UID LED LAN LED HDD LED |
| I/O Ports | 1 x USB 2.0 ports - VGA port |
| External Drive Bay | |
| Front Side Drive Bay | 4 Bay 3.5'' SATA HDD (6Gb/s) |
| Front Side Backplane | backplane with 4 SATA ports |
| Internal Side Backplane | 2 Bay 2.5'' SATA HDD |
| Power Supply | |
| Type | 1U, Redundant |
| Output Watts | 650W Platinum |
| System Fan | |
| Front | 4056 mm Fan x5 |
| Riser card Support | |
| Riser card Type | 2 x Symmetry Riser card(x16/x16) support 2 x Full height PCIE cards |
| MB Physical Status | |
| Form Factor | SSI EEB |
| Dimensions | 12'' x 13'' |
| Processor System | |
| CPU | Intel® Xeon® processor E5-2600/4600 v3 series * Supports up to 120W CPU only, for higher watt CPU support please contact sales rep. |
| Socket | Dual Socket LGA 2011 R3 |
| Chipset | Intel® C612 |
| System Memory | |
| Capacity | 16 DIMM slots |
| Type | Quad Channel memory technology Supports 2133/1866 LR/R/ECC, UDIMM and NVDIMM |
| Voltage | 1.2V |
| Expansion Slot | |
| PCIe 3.0 x 16 | 2 slots |
| Mezzanine slot | PCIex8(CPU1) with NCSI (for LAN mezzanine card) PCIex8(CPU2) (for LAN mezzanine card) |
| M.2 | 1, M key PCIe x4(CPU1) and SATA NGFF SATA3(shared with PCH SATA1) |
| Storage | |
| SATA Controller | Intel® C612: 10x SATA3, 2 pcs 4 port SFF-8087 CONN (8 ports), 2x SATA 7p (SATA1 shared with M.2) Marvell 9172 : 2x SATA 7p |
| Management | |
| BMC Controller | ASPEED AST2400 |
| IPMI Dedicated LAN | 1 x Realtek RTL8211E for dedicated management GLAN |
| Features | Watch Dog |
| Graphics | |
| Controller | ASPEED AST2400 |
| VRAM | DDR3 16MB |
| Rear Panel I/O | |
| VGA Port | 1 x D-Sub |
| USB 3.0 Port | 2 |
| Lan Port | 1 (IPMI mg) Lan port (RJ45) LAN Ports with LED (ACT/LINK LED and SPEED LED) |
| Serial Port | 1 (COM1) |
| UID Button/UID LED | 1 |
| Power connector in Front side | |
| Power connector | 1 (include Power button, Reset button, Power LED, HDD activity LED) |
| Internal Connector | |
| System event LED | 1 x 2pin Header for front system event LED (included in Aux_panel) |
| ME Security Override | 1 x 2 pin header (Flash Descriptor Security Override) (PCH) |
| System configuration | 1 x 3pin header for System Configuration (PCH GPIO connected) |
| SPI connector | 2 support Dual BIOS |
| Chassis Intrusion Header | 1 x 2pin headed, connect to SIO and PCH (included in Aux_panel) |
| Auxiliary Panel Header | 1 (include Locator /LED, LAN LED, System event LED, Case Open) |
| TPM Header | 1 |
| IPMB Header | 1 (BMC) |
| PMBus CONN | 1, for BMC I2C bus (BMC) |
| Buzzer | 1 |
| Fan Header | 2x CPU Fan, 8x Front system Fan, 1x Rear Fan (4-pin) |
| ATX Power | 1x (24-pin) + 2x (8-pin) |
| USB 3.0 Header | 1 x 19-pin header for 2x USB 3.0 Ports (to front panel), ESD and over-current protected |
| USB 2.0 Header | 1 x 9pin header, ESD and over-current protected |
| Front VGA Panel | 1 |
| Onboard LED | |
| Standby PWR LED 5vsb | 1 |
| Port 80 LED | 1 |
| Fan Fail LED | 5 |
| System BIOS | |
| BIOS Type | 64Mb AMI UEFI Legal BIOS |
| BIOS Features | Plug and Play (PnP) ACPI 2.0 Compliance Wake Up Events SMBIOS 2.8 Support ASRock Rack Instant Flash |
| Hardware Monitor | |
| Temperature | CPU Temperature Sensing SystemTemperature Sensing DDRs Temperature Sensing Environment Temperature Sensing |
| Fan | CPU/Rear/Front Fan Tachometer CPU Quiet Fan (Allow CPU Fan Speed Auto-Adjust by CPU Temperature) CPU/Rear/Front Fan Multi-Speed Control |
| Voltage | Voltage Monitoring:+12V, +5V, +3.3V, CPU Vcore, DRAM, 1.05V_PCH, +BAT, 3VSB, 5VSB |
| Environment | |
| Temperature | Operation temperature: 10°C ~ 35°C / Non operation temperature: -40°C ~ 70°C |